Asus TUF RTX3080Ti Gaming OC 12GB GDDR6X Graphics Card

Gr Card &aUfics Asus TUF RTX3080Ti Gaming OC 12GB GDDR6X

The TUF GAMING GeForce RTX 3080 Ti has been built to provide power and cooling &oatals. A new, fully-met &aholica cover houses three powerful, axial technology fans using dual durable ball bearing. Fan rotation has been optimized to reduce turbulence, and a stop mode stops all three fans at low temperatures. Below, the independent thermal dissipators for the GPU and the memory maintain the thermal t &easties under strict control. The additional &iacitims, including the TUF components, the Auto-Extreme technology, a new GPU support, and a vent on the backplane, make the TUF a suitable power.

FANS

FANS WITH AXIAL TECHNOLOGY

TUF Gaming cards take advantage of the ñ or the Axial Technology Fan, with three fans working together to meet the new ñ s and NVIDIA's high-octane demand. The fans are based on double ball bearing bearings to ensure constant performance and greater longevity in comparison with the sleeve bearings and other types of bearings.

NEW ADDRESSES

The two side fans rotate counter-clockwise to reduce the turbulence. And, to eliminate unnecessary noise, a stop mode stops all fans when the GPU temperature drops below 50 degrees and the energy consumption is low.

HEAT SINK

MAXCONTACT

To heat the array of the dissipators efficiently, so that the powerful, axial technology fans can be removed quickly, a manufacturing process is used that improves the softness of the surface of the heat sink at the peak microsc level. The additional flatness allows for better contact with the matrix, which helps to improve the transfer t &eacermal.

DISE Ñ OR 2.7 SLOTS

The sink draws heat into tubes that carry it through a stack of flaps that occupy 2.7 slots. This generation of the TUF Gaming tambic cards has a dedicated heat sink for VRAM to keep temperatures below the operating specifications.

PRINTED CIRCUIT BOARD

TUF components

The components are selected for the TUF Gaming cards in the form of their durability and performance. In addition to the first-level chokes and MOSFET, the capacitors that comply with the military grade certification make the TUF stand out from the competition. The components are welded to the PCB by the advanced Auto-Extreme automated manufacturing process. The smooth joints on the back of the PCB and the removal of human errors ensure that each card is satisfied with our rigorous specifications. For the latest, to ensure flawless performance when required, the cards are subjected to a grueling 144-hour validation test.

DISE Ñ O

COOL BOTTOM

An all-aluminum cover adds a robust protection to the TUF Gaming and a serious industrial and/or industrial-scale color card. A gray-scale combination of colors is adapted to any construction with ease.

ALL THE HEAT, OUT

If you look at the bottom of the grr card, you reveal m &aaltias s ñ enhancements. A wide ventilation of the backplane and a shortened printed circuit board allow the hot air to escape into the air extractors of the chassis rather than being recycled in the cooler. A GPU support provides additional stability to the connection between the array and the heat spreader. The E/S support is made of stainless steel to protect the ports and provide secure assembly. A conveniently located Dual Bios switch allows a select &o. Ask between the "performance" and "silent" mode for the customization of the default behavior of the non-software card.

FUNCTIONAL FRONT

Much attention has been given to the front of the GPU, since it is the visible part of the card in the card settings. You can customize a new addressable RGB element with Armory Crate to create a uniform appearance along with other ROG components. To meet the demands of energy from the GeForce RTX 3080 Ti, three 8-pin power supply connectors are present, along with an integrated circuit that monitors the voltage of the feed source rail. The circuit is sufficiently r &aaipido to detect any transient causing the rail voltage to drop too low. If that happens, a red LED will be lit to indicate a problem with the feed source. The reinforced metal frame of the Strix also is visible here, adding a literal layer of durability.

SOFTWARE

GPU II} {\expndtw1 E

The ASUS GPU Tweak II utility takes the adjustment of the gr card to the next level. It allows you to adjust the íres, including the clock clocks of the GPU, the frequency of the memory, and the voltage configuration, with the option of monitoring everything in real time for a display of a customizable display. Advanced fan control is also included with many functions to help you take advantage of the maximum amount of your card.

Specifications:

• Processor
  • Processor Family: NVIDIA
  • Processor gr &aUfico: GeForce RTX 3080 Ti
  • CUDA: S &iute;
  • N &uteacleos CUDA: 10240
  • Clock speed: 1365 MHz
  • Increase in processor clock speed: 1785 MHz
  • M &axime solution &oatuos n: 7680 x 4320 Pixels
• Memory: 10240 MB
• Memory adapter memory type: GDDR6X
• Memory bus: 384 Bit
• memory (max): 912 GB/s
• Frequency: 19000 Mbps
• V &iudero deo
  • Versi &oacutin OpenGL: 4.6
  • HDCP: S &iute;
• Connectivity
  • Quantity of DisplayPorts: 2
  • Interface Type: PCI Express x16 4.0
• control &iuteres to
  system m &iute. m &eticus: 350 W
  • Additional power connectors: 2 x 8-pin
• Details t &eachetics
  • Color: Black
  • Format: ATX
  • Graphics chipset: NVIDIA
  • Cooling type: Active
• Weight and dimensions
  • Width: 126 mm
  • Height: 51 mm
  • Depth: 299.7 mm
  • N Number of slots: 2.7