Bresser Rex 3D Wifi Printer

Bresser Rex 3D Wifi Printer

The BRESSER REX 3D printer (2010100) convinces for its capabilities and its ñ or slender and very compact, so it is part of the new generation of 3D printers.

The printer is equipped on three sides with an observation window, and a 3D printing platform can be monitored on the flexible printing platform. It is also possible to continuously observe and monitor printing without being present, since the printer has a camera that, if necessary, can be activated and used for a browser. In addition, the printer is not only able to connect to the terminals per WIFI, but also to the cloud function or via a USB connection. Therefore, this printer is ideal for computers, tablets and even smartphones.

Also, the built-in HEPA filter, which filters out harmful air particles, takes care that the air is clean in the 3D printer environment.

COMPACT APPARATUS – IMPRESI &BIG

&iex; The 3D printer has a ñ or ultra-compact and, despite its tama ñ or 390 x 340 x 410 mm intended especially for use in an office, has a relatively large constructive surface of up to 150 x 150 x 150 mm!

EXTRACT INTERCHANGEABLE EASY CHANGE

The patented constructive form of the extruder allows you to change it in a few steps. You do not need to first remove the printer before you can install a replacement extruder. Plug and Play with Easy Change. In addition, the extruder has a proprietary ventilation properties, thanks to which high quality printing results are obtained.

Character íres:

• 3D Element &o n &o
&o n exchangeable
• Closing Sensor
• CtiL T &arectil Control Panel
• C &oatuente online
• Software: REXprint
• File Formats: Input: 3MF/STL/OBJ/FPP/BMP/PNG/JPG/JPEG Output: GX/G
• USB/WIFI/LAN connection
• Operating system: Win 7/8/10, Mac OS
• Language of the printer software: alem &aentalment/ingl &eacetos s/franc és/espa ñol/poll/checo/turkish
• Languages of the screen: alem &aetues.n/ingl &eacetos s/franc és/espa ñ ol
• Detect &oatecn autom &arectitic of the filament: Pause of printing autom &arecutica when the filament is finished
• Printer &obution: +/-0.1-0.2 mm
• Height of the printing layer &obutin: 0,05-0,4 mm
• Types of filament compatible: PLA, ABS
• layout, WIFI settings
• 8 GB internal memory
• N Extruder Number: 1
• The boob/nozzle of the extruder can be removed: &iex; in 3 seconds, without the need to unmount the complete extruder!

OUR PRINTER PLATFORM &O: &iex; A AUT-MULTIPLE NTICO &EVERY MULTI-SIZE!

&iexex; Flexible, f &a; easy to change and, of course, with calefacci ó n!

&iex; The flexible constructive platform has been thoroughly tested for hundreds of hours in a flexi test and has proven to be extremely resilient!

Also, no problem is the pressure with ABS material, since the plate can be heated up to 100 ° C.

The platform can be removed easily to replace it, which is very beneficial to the consumer.

Content

• 3D printer
  • 1 extruder
  • 2 extruder nozzles/nozzles (1 already installed and 1 spare)
  • 1 flexible printer base (1 installed)
  • 1 fully white PLA filament of 300 g (1.75 mm) (approx. 105 m)
  • 1 fully black PLA filament of 300 g (1.75 mm) (approx. 105 m)
  • 1 HEPA air purification filter (already installed)
  • 1 esp &aetula tula
  • Network plug
  • Handling instructions

  Compatible Accessories:

  • 20802002N5000 BRESSER 500 g blue neutral PLA Filament
  • 2080200B4K000 BRESSER 500 g green neutral PLA Filament
  • 2080200CM3000 BRESSER 500 g black neutral PLA Filament
  • 2080200E8G000 BRESSER 500 g red neutral PLA Filament
  • 2080200GYE000 BRESSER 500 g white neutral PLA filament
  • 2080201 Flexible printer base
  • 2080203 Hepa air purification filter